Tesla K43D301B2S, Operating Instruction

Page: 12 / 24

12
ENG
Auto Tuning
Press „
MENU
“ key� Select Channel > Auto Tuning� Press „
OK
“ key, then press „ 
/
 “ key to select Search Type:
ATV+DTV, ATV, DTV� Press „  “ key� You can select country where you are by pressing „ 
/

/

/
 “� Press „
OK
“ key to
confirm� The device starts auto tuning� During auto tuning, the screen displays a message „ Are you sure you want to
exit DTV Tuning? “ by pressing „ MENU “ key� Select YES and press „ OK “ key to confirm, the device starts auto tuning
ATV channel, or select NO and press „ OK “ key to cancel� During auto tuning ATV channel, the screen displays „ Are you
sure you want to exit ATV Tuning? “ by pressing „ MENU “ key� Select YES and press „ OK “ key to confirm, or select NO
and press „ OK “ key to cancel�
DTV Manual Tuning (In DTV signal source)
Press „ MENU “ key, select Channel > DTV Manual Tuning� Press „ OK “ key to enter DTV Manual Tuning menu� Press
„  /  “ key to select channel, then press „  “ key to select and press ” OK /  /  ” key to confirm� After searching, the
DTV Manual Tuning menu closes automatically� During the search you may press „ MENU “ key to interrupt the search
and return to the last menu�
ATV Manual Tuning (In ATV signal source)
Press „ MENU “ key� Select Channel > ATV Manual Tuning� Press „ OK “ key to enter ATV Manual Tuning menu� Press
„  /  “ key to select Channel/Color System/Sound System, and then press „  /  “ key to select which you wish, then
select Search� Press „  /  “ key to search from low frequency or high frequency� After selecting frequency, press
„

/

“ key to tune from low frequency or high frequency� During manual searching, you also may press „ MENU “ key to
interrupt the search and return to the last menu�
Refer to the table below for the specific setting in the menu�
Menu setting list
Picture
Picture Mode Adjust the overall effect of images: Standard, Soft, User, Bright�
Contrast
Adjust the overall layering of images: increase the analog value to improve the contrast and
decrease the analog value to reduce the contrast (0-100)�
Brightness
Adjust the overall brightness of images: increase the analog value to improve the
brightness and decrease the analog value to reduce the brightness (0-100)�
Hue
Adjust the hue of images: increase analog value to increases green and decrease analog
value to increases purple (0-100)�
Sharpness
Adjust the sharpness of images: increase the analog value to increases the definition and
decrease the analog value to reduce the definition (0-100)�
Saturation
Adjust the color depth of images: increase the analog value to improve the depth and
decrease the analog value to reduce the depth (0-100)�
Color Temperature Adjust the overall color temperature of images: Standard, Warm, Cold�
Aspect Ratio Adjust the Aspect Ratio: Full, 4:3, Film, Subtitle�
Noise Reduction Set the grade of noise reduction: Middle, High, Off, Low�
PC Image Mode Adjust the screen aspect ratio in PC mode, which is valid in VGA signal source�
Remark: The Contrast, Brightness, Hue, Sharpness and Saturation only can be adjusted in User mode.
Sound
Sound Mode Select the audio mode: Standard, Music, Movie, User�
Bass
Adjust the bass: increase the analog value to increase the bass and decrease the analog
value to reduce the bass (0-100)�
Treble
Adjust the treble: increase the analog value to increase the treble and decrease the analog
value to reduce the treble (0-100)�
Balance
Adjust balance degree of right & left audio track: move the analog value to left to increase
the left audio track; move the analog value to right to increase the right audio track
(L50-R50)� Generally, the balance is set to 0�