Tesla HTR300, User Manual

Page: 8 / 70

8
Cleaning the surface
Clean the heater with a duster or a soft wet cloth.
Do not use chemical solvents (such as benzene, alcohol, or gasoline) as they may cause irreversible
damage. Make sure no water enters the control panel or gaps in the casing.
Do not run the unit until completely dry.
Place the heater in its original box or cover to protect it from dust when not in use.
Store it in a cool dry place.
If the above solutions do not resolve the problem, please contact the service centre.
TROUBLESHOOTING
Do not repair or disassemble the unit by yourself, unauthorized repair attempts will invalidate the
warranty and may cause bodily harm.
Issue Possible Reason Solution
No power 1. Power cord is unconnected
2. There is no power from the
socket
3. The power switch on the rear
of the unit is turned off
1. Connect the power cord
2. Check socket is turned on
3. Ensure the power switch on
the rear of the unit is in the on
position
Odour emission from the unit 1. New unit.
When the unit is used for the
first time the fan motor may
produce odour that will dissipa-
te within a week of use
1. No action is required
Strong vibrations and noise 1. Unit is not placed on a flat
surface
2. Unit may be damaged
1. Place on a flat surface. May
put an anti-vibration mat
underneath
2. If the heater is damaged
discontinue use and contact
the service centre
TECHNICAL DATA
Model TSL-AC-HTR300
Cable length 1,5 m
Rated input 2000 W
Power supply 220-240 V/50-60 Hz
Net weight 3,9 kg
Dimensions 230mm x 230mm x 700mm
Heating method PTC
Noise level 53 dB