Tesla HTR300, User Manual

Page: 5 / 70

5
OPERATION
Your heater may be operated by using either the manual controls located on the front of the fan or
by Tesla Smart Application.
POWER SWITCH ON THE BACK OF THE UNIT
Used to turn the heater ON and OFF. This should be used to turn off the appliance before leaving
it unattended.
CONTROL PANEL AND SETTINGS
SWING BUTTON
Press to turn the Swing function on and off. When it is operational the horizontal direction of the
airflow is slowly moved from side to side and the Swing indicator will be illuminated.
MODE BUTTON
Press to cycle through the three available modes: Fan, Low Heating, and High Heating .
TIMER BUTTON
Press repeatedly to increase the running time in 1-hour intervals. The timer can be set between 1
hour and 12 hours. The display will show the duration currently set. When the display is showing the
timer duration the symbol will illuminate next to the timer. To cancel the timer repeatedly press
the timer button until 00 is shown.
TEM. BUTTON
Press repeatedly to increase the desired room temperature. After pressing the tem. button, the de-
sired temperature will flash for 3 seconds before the unit reverts to showing the room temperature.
When the desired temperature has been reached the unit will change into fan mode.
LIGHT BUTTON
Pressing the light button will turn on the ambient light. Blue, Green, Purple, and White are four
colors of light.
ON/OFF BUTTON
Used to turn the bladeless heater ON and OFF.
DEVICE SCREEN
The device screen is the main control screen for the heater, providing access to the controls to
amend the functions and settings in Tesla Smart Application
Swing Mode Timer Tem. Light
ON/OFF
h