Tesla HTR300, User Manual

Page: 7 / 70

7
WIFI CONNECTION GUIDE
WIFI CONNECTION GUIDE
Connection Type Frequency of Flashes
Quick Connection Flashes twice per second
AP (Access Point) Flashes once per second
MODES AVAILABLE FOR SETUP
The heater has two different setup modes, Quick Connection and AP (Access Point). The quick
connection is a quick and simple way to set the unit up. The AP connection uses a direct local wifi
connection between your phone and the heater to upload the network details.
CHANGING BETWEEN CONNECTION TYPES
To change the unit into AP mode, with the appliance in standby (Power switch on and the unit
turned off), press and hold the ON/OFF button for 5 seconds.
To change back to Quick connection mode, turn the appliance off using the switch on the rear.
Leave turned off for 10 seconds before returning the switch to the on position. Then press and hold
ON/OFF button for 5 seconds.
Tesla Smart Application
1. Scan the QR code specified above, and download and install the Tesla Smart APP.
2. Open the Tesla Smart APP and choose to create a new account or log in directly.
3. Click the“+“ sign in the upper right corner to add the device.
4. Select the product.
5. Enter the WIFI password and click ok.
6. Follow the instructions. Note: please ensure that the mobile phone and heater are in the same
WIFI environment.
7. Wait for the device connection to complete.
8. “Add device success“ appears to indicate that the device connection was successful.
9. Click finish to enter the control interface to control the machine.
CLEANING AND STORAGE
ATTENTION: Please shut off the unit and unplug from the mains before cleaning or performing any
maintenance.