background image

Subject to the exclusions and limitations described below, the Charging Equipment Limited Warranty 
covers the refund, repair or replacement necessary to remedy any manufacturing defects in a Tesla 
manufactured and supplied Wall Connector that occur under normal personal use for a period of 48 
months, or a period of 12 months for normal commercal use*, and a Tesla manufactured and supplied 
Mobile Connector or charging adapter that occur under normal use for a period of 12 months, starting 
from the date of invoice to the customer for any charging equipment. Any Tesla manufactured and 
supplied connector or adapter included in the initial purchase and delivery of a Tesla vehicle by Tesla is 
covered under the Basic Vehicle Limited Warranty section of the New Vehicle Limited Warranty for 4 
years or 50,000 miles (80,000 km), whichever comes first, subject to the terms and conditions of the 

New Vehicle Limited Warranty.

*For warranty claims specific to Wall Connectors, “commercial use” means Wall Connectors used for 
purposes other than charging at a residential single family home for daily personal use, which includes, 
but is not limited to, charging at hotels, offices, parking lots and complexes (including apartment, 
condominiums and other multi-family or unit dwellings), and retail and other locations that allow 
(including by being listed online or publicly) for pay-for-use charging, or are located where users other 
than the owner could reasonably obtain access to the Wall Connector.

This Charging Equipment Limited Warranty does not cover any damage or malfunction directly or 
indirectly caused by, due to, or resulting from, normal wear or deterioration, abuse, misuse, negligence, 

accident, lack of or improper installation, use, maintenance, storage or transport, including, but not 
limited to, any of the following:

Failure to follow the instructions, operation, maintenance and warnings published in the documentation 
supplied with your Tesla connector or adapter;

External factors, including but not limited to, objects striking the Tesla connector or adapter, faulty or 
damaged electrical wiring or connections, external electrical faults, junction boxes, circuit breakers, 
receptacles or power outlets, the environment or an act of God, including, but not limited to, fire, 
earthquake, water, lightning and other environmental conditions;

General appearance or damage to paint, including chips, scratches, dents and cracks;

Failure to contact Tesla upon discovery of a defect covered by this Charging Equipment Limited 
Warranty;

Any repair, alteration or modification to the Tesla connector or adapter or any part, or the installation or 
use of any parts or accessories, made by a person or facility not authorized or certified to do so; and

Lack of or improper installation, repair or maintenance, including use of non-genuine Tesla accessories or 
parts.

Although Tesla does not require you to perform all maintenance, service or repairs at a Tesla Service 
Center or Tesla authorized repair facility, this Charging Equipment Limited Warranty may be voided, or 
coverage may be excluded, due to lack of or improper maintenance, service or repairs. Tesla Service 
Centers and Tesla authorized repair facilities have special training, expertise, tools and supplies with 
respect to Tesla connectors and adapters and, in certain cases, may employ the only persons, or be the 
only facilities authorized or certified to work on Tesla connectors and adapters. Tesla strongly 
recommends that you have all maintenance, service and repairs done at a Tesla Service Center or Tesla 
authorized repair facility in order to avoid voiding, or having coverage excluded under, this Charging 
Equipment Limited Warranty.

WARRANTY INFORMATION

29

Gen 3 Wall Connector Manual

Summary of Contents for Gen 3 Wall Connector




































Reviews: