Light Codes
Startup
Once energized at the circuit breaker, every LED (seven total) on the faceplate will illuminate for one
second.
After Startup
After Wall Connector is energized at the circuit breaker, certain green LEDs (depending on the circuit
breaker size) will illuminate for 10 seconds. See table below for exact light codes.
Circuit breaker
60 A
50 A
40 A
30 A
20 A
15 A
Maximum output
48 A
40 A
32 A
24 A
16 A
12 A
NOTE:
To re-display the green LEDs after the initial 10 seconds, press and hold the charging handle
button.
When multiple Wall Connectors are linked for power sharing, the center blue LED will illuminate during
the 10-second startup window.
Other
Standby, waiting to plug
in
Charging in progress
SSID broadcasting, ready
to commission
Waiting to charge,
communicating with
vehicle
Top green solid
Every green streaming
Green pulsing
Blue solid
WALL CONNECTOR LEDS
26
Gen 3 Wall Connector Manual
Summary of Contents for Gen 3 Wall Connector
Page 1: ...Gen 3 Wall Connector Manual 48A Single Phase...
Page 2: ......