Tescom TC-5922BP, User Manual, Page: 41 / 59

RS-232C Command List
33
5.5.1 Error Data List
Table 5-3 List of Error Data
Error Code Description
ERR10 Syntax error. The command does not exist or is invalid.
ERR20 Handler-inward sensor error. It only occurs when the handler is in sensor mode.
(The horizontal operation of fixture is incomplete.)
ERR30 Probe-downward sensor error. It only occurs when the probe is in sensor mode.
(The vertical operation of fixture is incomplete.)
ERR40 Status error, It occurs when the command is not executable. For instance,
OUTWARD (handler) or UPWARD (probe) while the lid is closed. The error is
returned if a command is sent when the motion can not be done in conjunction
with the current status. It also occurs when only one button is pressed to close the
lid.
ERR50 Lid-open sensor error. It occurs only to certain products which should always detect
whether the lid is open. The response comes when the lid-open sensor does not
detect the main cylinder in open position.
ERR60 Safety error. The lid-close sensor does not detect the cylinder in close position.
ERR90 It occurs when a fixture operation command is sent while the corresponding
fixture is off. It also occurs when either one or both buttons are let go while closing
the lid.