Tescom TC-5922BP, User Manual, Page: 32 / 59

24
Operating with Fixture
Counting Function
Pneumatic Shield Box counts the number of lid open/close cycle and saves it on the memory. The
cumulative number of open/close motion can be viewed on a PC by sending “COUNT?” query through
RS-232C. The box will return the number in 8 digits.
4.2.5 Pass/Fail LED Indicator
Green or red LED indicator will be turned on if the corresponding command "PASS" or "FAIL" is sent
through RS-232C.
This function can be useful to visualize the result when the Shield Box is controlled via RS-232C.
The red LEDs glow automatically if there was any problem in previous motion (lid or fixture).
4.3 Operating with Fixture
The fixture operation modes of standard TC-5922BP are both off at the time of release
('Handler: OFF, Probe: OFF' will return if the query 'SOLENOID MODE?' is sent.). They must be
configured if they are to be used.
4.3.1 Fixture Operation Modes
The handler and the probe of fixture can operate in 3 modes each, and their operations are
automatic, corresponding to the open/close motion of the lid.
The operation of fixture can be controlled with commands via RS-232C. Refer to the list of commands