23
8
Before product maintenance
* Vacuum: A state of pressure that is lower than atmospheric pressure
To prevent failures
Potential foreign matter
sucked into the main body
(1) (2)
Please do not use a dishwasher or a dish dryer.
Please be careful not to lose seals, etc.
Please do not use benzine, thinner, metal scrubbing
brushes, polishing powder, or chemical-containing
cloths for cleaning the product.
Before using the product
Care of the product
Please never forget to turn OFF the power and pull out the power plug from the
outlet before you begin product maintenance.
When the product is heavily soiled, please perform primary washing following the procedures below.
1
Following procedures 1–3 on pp.13–14,
attach the blender container unit containing
water or lukewarm water (lower than 40°C), i.e.,
about a third of the container (about 250 ml),
using neutral kitchen detergent, i.e.,
several drops to the main body. Then, turn ON the
power.
2
(1) Operate the product for a few seconds by pushing the ON button.
(2) Then, stop it by pushing the Cancel button.
3
After the rotation has stopped completely, turn OFF the power by pushing
the Power button, and then dismount the blender container unit from the
main body. (Please see p.15.)
4
Pull out the power plug from the outlet.
5
Dismount the cover, discard the water (or the lukewarm water), rinse the
container lightly with water, disassemble the product, and ensure the care
of each part.
Please adjust the operating time depending on the degree
of soiling.
If foreign matter is sucked into the main body, a failure may occur.
Please use the product by complying with the following instructions.
When the container interior is decompressed, the air contained in the ingredients may come up as bubbles or
the ingredients may bubble.
An amount less than the maximum amount (prescribed on p.12 and p.19) usually causes no problem.
However, when bubbles are about to reach the cover, please push the Cancel button and stop the operation.
Please process ingredients blended halfway by using the blending function. (Please see p.16.)
Powdered items (roasted
soybean flour, cocoa
powder, powdered sugar,
protein, etc.)
Steam
Liquid
material
attached to
the cover,
etc.
Air bubbles and bubbles from mixed
ingredients
Please use the ingredients after being
processed using the blending function or
after being dissolved completely.
Please see p.22 for details.
Please use ingredients that have cooled
down to at least below 40
O
C. (Otherwise, the
container may break.)
Ingredients that are prone to produce air
bubbles or other bubbles
Ice cream, apples, etc., that contains a lot of air
Milk, soy milk, dairy, etc., in which bubbles
are prone to swell
Please take care of each cover part every
time after use and assemble the unit only
after wiping off any moisture.
1. Please check the maximum amount for the
container prescribed on p.12 and p.19, and
use the unit only by complying with the
capacity.
2. Please decant the liquid to the smoothie
container so that bubbles are not produced.
Failure warning:
Please never push the Vacuum Blending button during
primary washing. Otherwise, failure may occur.
Please note:
Please note:
