13
Using the vacuum blending function
18
Point to note:
Point to note:
Point to note:
Point to note:
Matching
both
guides
(2)
(1)
Rotating
Attachment guide
Attachment guide
Blender
container
unit
Inner cap
Inner cap
Cap seal
Smoothie container
cover (back side)
Maximum
amount
Vacuumizing
arm
Attach the seal to
this groove.
This is an automatic setting for processing while retarding oxidization, by vacuumizing* the blender
container interior.
Using the blender
Please assemble each part correctly and attach the blender cover firmly. Otherwise, a failure or error may
occur.
You must use the blender with an
amount of ingredients that is less
than the maximum amount.
(Please see p.12.)
Please view the container from the
side, and when the ingredients
exceed the line, remove some with
long utensil, etc., instead of pushing
it down.
Using the vacuum storage function
1
Put the ingredients into the blender container and attach the blender cover.
(Please see pp.9–10.)
2
Set the container and the cover
into the main body.
* Regarding the ingredients, please follow the description on pp.11–12.
* Please do not cover up the hole in the center, as
air needs to be able to pass through the hole.
Please take care of each part after use, and put the unit together only after
wiping off any moisture. (Please see p.9 and p.25.)
(1) Stand the vacuumizing arm upright.
2
Attach the inner cap.
3
Put your smoothie ingredients, etc.,
into the smoothie container and
cover the container with the
smoothie container cover.
(1) As shown in the illustration,
attach the cap seal to the inner
cap.
(2) Fit the inner cap to the center of the
smoothie container cover.
(3) Attach the inner cap by rotating it in
the direction of the arrow.
(2) Place the blender container unit on
the main body while matching both
attachment guides.
* Please be careful not to hit the
vacuumizing arm.
Push both ends of the smoothie
container cover down so that the cover
does not slant.
Rotate it until it stops.
Please note:
