14
17
Point to note:
Point to note:
Pushing
Pushing in
Stop
Lighting up
Smoothie container cover
Center of
the smoothie
container
cover
View from the back
side of the smoothie
container cover
Cover valve
Cover
valve
Cover side
Smoothie
container
cover seal
Smoothie container cover
Placing the back side of the
smoothie container cover up,
attach the seal to this groove.
Lighting up
* Vacuum: A state of pressure that is lower than atmospheric pressure
Using the blender
3
Insert the power plug into the
outlet, and then turn ON the power
by pushing the Power button.
4
Push the Vacuum Blend button.
With a beep, the power indicator lights up.
The process begins in the order of:
decompression of the container interior, pulsing
(5 times), automatic blender operation (1 minute),
and completion, with beeping. When you want to
stop operation mid-way, please push the Cancel
button.
When the operation is stopped mid-way with
repeated beeping as a warning, please follow the
procedure shown on pp.27–28.
* With a clicking sound, the vacuumizing
arm is set into the blender cover.
* When you attach the cover valve, please pay
attention to the direction of the valve. If the
direction is not correct, the valve may become
hard to remove.
* Please confirm that the cover side
end of the cover valve sits out of the
back side surface of the smoothie
container cover, with a round shape
without being folded.
(3) Pull down the vacuumizing arm and
push on it with the palm of your hand.
* When the ingredients bubble while decompressing the container interior and when the
bubbles are about to reach the cover, please push the Cancel button immediately and
stop the operation.
When you have stopped the operation mid-way or when you want to perform further
blending, you can continue processing the ingredients using the blending function.
Using the vacuum blending function in a state where ingredients, etc., are attached
to the blender cover after stopping the operation may cause failure. (To prevent
such a failure, even if you push the Vacuum Blend button after stopping the
operation, the blender will not operate.)
When you use the blender for the first time or when using it after a period of non-use,
please wash the parts other than the main body before using it. (Please see
pp.23–26.)
Using the vacuum storage function
Please assemble the parts only after performing proper maintenance and after wiping down any moisture.
Adhered matter such as previously used ingredients may cause an error.
Please never forget to attach the cover valve and each seal material, and assemble each part correctly.
Otherwise, failure or error may occur.
Please attach the parts firmly so that no gap is generated between the smoothie container and the smoothie
container cover.
Assembling the smoothie container unit
1
Assemble the smoothie container cover.
(1) Attach the cover valve by pushing it into the mounting hole of the smoothie container cover.
(2) Attach the smoothie container cover seal to the groove of the smoothie container cover.
When you use the blender continuously,
please do not forget to pay attention to
the blender container cover.
Please note:
