background image

For household use

Table of Contents

Thank you for your purchase.
Before using this product, 
please read this instruction 
manual and use the product 
correctly. After reading the 
manual, please keep it close 
at hand for easy reference.

Instruction 

Manual

NSW27865

Warranty

REGISTRATION FORM

1.  Care With You Pty Ltd (the “Importer”) warrants 

the vacuum blender (the “Product”) is free from 
faults in manufacture and materials for one (1) 
year (“Warranty Period”) from the date of purchase.

2.  Our Products come with guarantees that 

cannot be excluded under the relevant 
Australian Consumer Law. If there is a major 
failure with the Product, you are entitled to a 
replacement or refund. The benefits given to 
you by this warranty are in addition to your 
other rights and remedies under any laws 
which relate to the Product.

3.  If the Product proves to be defective within 

the Warranty Period by reason of improper 
workmanship or material, we may, at our 
own discretion, repair or replace the Product 
without charge.

4.  This warranty only applies to Tescom products 

purchased in Australia and sold by the 
Importer or its authorized retailers and dealers. 

5.  The warranty is invalidated under the following 

circumstances:
a. If the Product is not used in accordance with 

the instructions supplied or is misused;

b. If damaged after a fall or a shock;
c. If connected to a higher mains voltage 

supply;

d. If dismantled or tampered with in any way;
e. If the serial number or product plate is 

removed or defaced;

f. The Products have been serviced or 

otherwise repaired by a person not 
authorized to do so by us or where 
non-approved replacement parts are used.

6.  This warranty does not cover loss of use of the 

Product or consequential loss of any nature.

7.  Should you experience any difficulties with your 

Product, please send a written claim or email to 
[email protected]. On receipt of your 
claim, we will seek to resolve your difficulties.

8.  In order to claim under the warranty, you must:

a. retain this warranty with your receipt/proof 

of purchase. Your receipt/proof of purchase 
must indicate clearly the name and address 
of the Supplier, the date and place of 
purchase and the product name; and

b. return the Products to us to the address 

below by prepaid freight within the Warranty 
Period accompanies by a copy of your 
receipt/proof of purchase.

9.  Any parts of the Products replaced during 

repairs or any product replaced remain the 
property of the manufacturer.

10. This Warranty does not cover the cost of 

claiming under the warranty or transport of the 
Products to and from You or the retailers to us.

11. The Products are designed for domestic use 

only. A limited 90-day warranty applies to any 
commercial use of the Products.

12. For further information or inquiries, contact us on:

Care With You Pty Ltd
PO Box 148
ENFIELD NSW 2136 AUSTRALIA
E: [email protected]
W: www.tescom-japan.com.au

To register for your warranty, please complete and return this portion to Care With You Pty Ltd within 30 days of purchase.

Date of Purchase:              /           /   

Naame of Retailer: ….…………...………....

Address of Retailer: ……….........................

.....…………..……………………..................

Model No.: .....….....………………......…….

Serial No.: ….………......…………...……….

Mr     /     Mrs     /     Ms     /     Miss

…………………………..…………….…....…
Surname                   Initial

Address: …….………..….....................……

…..……………....…..………………………..

State: ……...........  Postcode: ...……..….....

Tel: ..…........……………………..………..…

Email: .…….……………......……..………....

Product Number: TMV1500AU

Vacuum Blender

Safety Warnings ..................... 1

4

Part names and functions ...... 5

6

Before using the product ...... 7

8

Using the blender ..................9

16

Using the vacuum storage function ... 17

21

Advice on processing ............... 22

Maintenance........................ 23

26

About error notification ...... 27

28

Troubleshooting ........................ 29

Specifications ........................... 29

Recipes .................................... 30

V

acuum Blender  

TMV1500A

U

8142-1

Summary of Contents for Nobby TMV1500AU

































Reviews: