ACT6000 User Guide
– January 2021 Page 16 of 52
6. Use mode (frequent commands, menu hierarchy ..)
Frequent Commands
The
ACT6000’s human interface is very intuitive due to the displayed info.
The function keys (
F1
-
F5
), allows various configurations or facilities related to the specific
menu.
Wen turned on, the Main Menu is displayed
where the various types of selectable
measurements or functions and other
configuration menus are shown.
On the Main Menu the date & time are
shown battery status, loudspeaker /headset
enable.
The selection of any item is made by the
use of the arrows
of the commands
group or by pressing the associated
number on the keypad.
In most of the active menus it is possible to adjust the LCD brightness / contrast and
volume loudspeaker through the key and the
of the commands group.
When a menu is selected, by the commands group, to access the next menu it is
necessary to confirm the choice with the (Enter) key;
if the selection takes place by the keypad, the entry to the next menu is straight forward.
Return to a previous menu is always allowed by the (Escape) key.
By pushing the
“Photo” key, the measurement can be temporarily frozen and a
special function-key will be enabled to save the measurement on the internal memory. By
pushing the key the measurement will be reactivated.
Where possible, pushing the (Cancel) key allows the immediate upload the
screenshot to the Pen-Drive or PC (image in BMP format).
Note:
Depending on the software release or the unavailability of some functions or internal
optional modules the related selection may not be available.