UFP12, UFPB12, UFPR12, UFPLB12
EN
6
Assembling your processor for slicing or grating
Place the motor unit on a solid level surface and
press down to attach the rubber feet to the work
top.
6: Place the inner motor shaft into the recess in the
motor unit
8: Place the prepared plate onto the motor shaft
and check it is secure.
Preparing the plate holder for grating or slicing
5: To attach a slicing or grating plate:
At the narrow end of the plate here is a small tab.
Place this in the recess at the side of the holder and
press down to lock the plate in place.
Ensure that the slot in the blade fits securely over
the tab in the holder and that the blade is firmly
locked in place.
To remove the plate: Lift the plate off the tab and
then lift the plate from the holder.
Take care not to touch the blade. If necessary wear
protective gloves.
5a
5b
6
7: Place the bowl on the motor base and then
turn the bowl clockwise until it is locked onto the
motor base. The ‘LOCK’ mark on the bowl should
align with the arrow on the base.
7
8
9: Place the lid on the bowl. Locate the lug to the left
of the slot in the motor unit. Turn the lid clockwise
(to the right) and lock it firmly into position.
Insert the pusher into the funnel if needed.
9
Summary of Contents for UFP12
Page 47: ......