![background image](http://html.mh-extra.com/html/tesa/tesa-hite-magna-400/tesa-hite-magna-400_instruction-manual_1090546009.webp)
TESA-hite Magna 400 / 700
9
mm
Mode 1 : 1x
Mode 2 : 2x
+
—
« PRESET » function (mode 1, 2 and 3)
Choice:
Choice:
Shift one position to the left
Confirm preselected reading
Cancel preselected reading
Indirect reference point
3 DESCRIPTION OF THE COMPONENTS
3.1
3.1
3.1
3.1 IIIInstrument base
nstrument base
nstrument base
nstrument base
The base is chemically nickel-plated in order to make it very resistant to corrosion. Its lower face,
which has been machined to ensure that it is rigorously flat, guarantee the stability of the TESA-Hite
Magna 400 700. The lugs 6 (Fig. 1) are designed especially for supporting the TESA-Hite Magna 400 /
700 against a parallel rule or for guiding it along such a rule, for example.
3.
3.
3.
3.2
22
2 Vertical column, measuring head and movement of the head
Vertical column, measuring head and movement of the head
Vertical column, measuring head and movement of the head
Vertical column, measuring head and movement of the head
The rigid vertical column is perpendicular to the base, to which it is permanently fixed. A measuring
head slides on the guide and the movement of the head is recorded by the magnetic measuring
system magna
µ
system (TESA patent). The measuring head can be moved in infinitesimal increments
by the fine-adjustment system, for example when using fine probes or measuring small bores. The
knurled screw 9 (Fig. 1) is used to lock the measuring-head movement that is thus left free for
scanning. However, if necessary, the head itself can also be locked by using the built-in system.
Summary of Contents for TESA-hite Magna 400
Page 2: ...TESA hite Magna 400 700 2 ...