FF-MM-407-REV - 00
Page 5
Operation and Maintenance Guide Pneumatic Angle Grinder
Suggested Lubricants
Brand
Above 27oC / 80oF
5oC to 27oC / 41oF to 80oF
Below 5oC / 80oF
Shell
Toona R 72
Toona R 41
Toona R 27
Mobil
Almo 529
Almo 527
Almo 525
Esso
--
Arox EP.65
Arox EP.45
Caltex
Rando Oil 100
Rando Oil 100
Rando Oil 46
Cp
--
--
Airolene Tool OiI
Texaco
Regal Oil F (R&O)
Regal Oil PE(P&E)
Regal Oil PE(R&O)
Daltron
Silkolene 881
Silkolene 548/T
Silkolene 733
Burmah Castrol
Castrol RD Oil 3
Castrol RD Oil Light
Megna SPX
Duckham
Garnet 7
Garnet 6
Zero Fio 5
Sternol
Merlin 87
Merlin 71
Merlin 54
Petrofina
Purifoc 53
Purifoc 46
Purifoc 32
Chevron
Vistac Oil 18X
Vistac Oil 19X
Vistac Oil 9X
Lubrication Requirements
Always install a line lubricator on the air line as
close to the tool as possible. A filter-regulator
lubricator unit (FRL) is strongly recommend-
ed. Keep the lubricator bowl topped up with
recommended grade of oil and check that the oil
is reaching the tool. Running the tool without
lubrication is likely to cause damage to the
components causing premature replacement.
