FF-MM-407-REV - 00
Page 3
Operation and Maintenance Guide Pneumatic Angle Grinder
Introduction
Teryair Pneumatic Angle Grinders are well suited for rugged production use. They are economical-
ly designed and kept as light as possible to reduce fatigue. Speed governors are standard equipment
which ensure optimum performance.
Intended Use
• Teryair angle grinder AG-4 is rugged and
dependable tool to give you years of sat-
isfactory service.It is generally used for
sanding, rust removal, rough grinding and
cutting application.
Prohibitive Use
Pneumatic angle grinder is prohibited to be
used for purposes other than mentioned in
intended use.
Following safety precautions should be taken
• Wear appropriate Personal Protective
equipments .
• Do keep hands & clothing away from mov-
ing parts.
• Pneumatic angle grinder should be stored
in dry environment.
• Do not allow the pneumatic angle grinder
to run unattended.
• Do not modify pneumatic angle grinder.
• Please check the hose connection prior to
starting the pneumatic angle grinder.
Teryair
Model No
IMPA
Code
Wheel Size
mm
Free Speed
R.P.M
Air Inlet
Air Hose
mm
Spindle Thread
Wheel
Weight
Kgs
AG 4
59 03 01
100
13,600
1/4”
9.5
M10 x 1.5 P
1.7
AG 7
59 03 02
180
7,600
3/8”
12.7
M12 x 1.25 P
3.0
Technical Data
Safety Instructions
• Stay alert and use common sense - Do not
Always wear suitable protection, eye gog-
gles, ear muffs, safety shoes etc to safe guard
against possibility of flying particles. Ensure
that a wheel guard is fitted onto the tool and
the wheel is secured properly. Never oper-
ate the tool over the rated 90 psi pressure,
Check that all bolts and other fasteners are
tightened correctly. Do not exert excessive
pressure against the work surface. Never use
larger wheels than recommended and check
new wheels for cracks before using them
on the tool. Keep hoses in good condition.
Check hoses for wear and ensure that fittings
are secure. Accidental disconnection while
tool is in use can make the hose whip and
can be safety hazard.
• Only well- instructed personal should op-
erate the tool. Any integral part of this tool
should not be removed for independent use
or for any other application. Always observe
safe working pratice and local safely regu-
lation at all times. Do not use this tool in
wet location.Do not expose to rain. Do not
modify the tool and also do not use it for
any heavy work more than for which it is
intended for. Disconnect the tool from air
supply when not in use. Do not use in ap-
proprite attachment in an attempt to exceed
max. capacity of the tool.
