Page
18
of
26
4531200 / 1052
TECHNICAL INFORMATION
For SMP2 serial number 0101-5999
The Harvest SmartPReP 2 Centrifuge meets the requirements for leakage current and hi-pot testing listed
in BS EN 60601-1 and UL 2601-1 standards for Medical Electrical Equipment.
(Less than 100µA on model SMP2-100 and SMP2-115)
(Less than 500µA on model SMP2-230)
G force during first spin = 1250
G force during second spin = 1050
Disconnection device
Appliance coupler
Rotor Disposable Capacity
2 or 4
Processing Time
approx. 14 minutes
The power outlet on the back of the unit is for future Harvest accessories and should not be used for
anything else. The appliance coupler (also known as the power cord) must always be easily accessible.
2.5 meter power cords supplied by Harvest Technologies, Corp. are the only acceptable means to power
the SmartPReP 2 Centrifuge. Power quality should be that of a typical commercial or hospital environment.
PHYSICAL SPECIFICATIONS
Height:
8.73 in. (22.2 cm)
Weight:
34 lb. (15.42 kg)
Width:
16.5 in. (41.91 cm)
Weight, Ship:
42 lb. (19.05 kg)
Depth:
18 in. (45.72 cm)
STANDARDS
Harvest reserves the right to discontinue or change specifications without prior notice on all products. The
SmartPReP 2 System has been tested and conforms to the following standards:
UL 61010A-1, First Edition, 2002 - Electrical Equipment for Laboratory Use; Part 1: General Requirements
UL 3101-2-20, First Edition, 1997 - Electrical Equipment for Laboratory Use; Part 2: Laboratory Centrifuges
IEC 60601-1-2:2001 Medical Electrical Equipment - Part 1: General Requirements For Safety 2. Collateral
Standard: Electromagnetic Compatibility - Requirements And Tests
IEC 61326-1:1998 Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 1: General requirements
CAN/CSA C22.2 No. 1010.1-92 - Safety Requirements for Electrical Equipment for Measurement, Control,
and Laboratory Use, Part 1: General Requirements
CAN/CSA C22.2 No. 1010.2.020-94 - Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use, Part 2: Particular Requirements for Laboratory Centrifuges
IEC 61010-1:90 / A1: 93 / A2: 95 - Safety Requirements for Electrical Equipment for Measurement, Control,
and Laboratory Use, Part 1: General Requirements
IEC 61010-2-020: 92 - Safety Requirements for Electrical Equipment for Measurement, Control, and
Laboratory Use, Part 2: Particular Requirements for Laboratory Centrifuges
EN 61326 - Electrical Equipment for Measurement, Control and Laboratory Use
EMC Requirements Part 1: General Requirements Includes Amendment A1: 1998;
IEC 61326: 1997 + A1: 1998
ETL Control # 117553
