User Manual for Tersus GeoBee30 v1.0
8
1. Introduction
This chapter mainly introduces the overview, system structure, package list,
and installation guide of the Tersus GeoBee30 which is an upgraded version of
Tersus GeoBee.
1.1 Overview
The Tersus GeoBee30 is a dedicated and cost-effective solution to establish a
permanent reference station. With Tersus Ntrip Caster Service, Ntrip Modem
and David30 Receiver, the GeoBee30 opens the possibility for users to
transmit Real Time Kinematic (RTK) corrections via Internet (Ethernet or
2G/3G/4G) in a simple, user-friendly way, just using a SIM card or Ethernet
cable without any need of a static IP. GeoBee30 can also work as GNSS
Rover to receive RTK corrections from Tersus Ntrip Caster or any CORS
service.
Ntrip server mode: use David30 GNSS receiver to create a base station. This
temporary base or CORS are for surveying, agriculture, UAV, machine control,
and etc. It is also ideal for deformation monitoring. Tersus GNSS Inc. provides
Ntrip Caster to transfer data.
Ntrip client mode: connect David30 or other Tersus GNSS receivers to Tersus
Ntrip Caster or any Ntrip/CORS service. David30 is mainly used for surveying,
and also used as a GNSS sensor in various applications, such as mobile
mapping, UAV, machine control, agriculture, and etc.
