User Manual for Tersus GeoBee30 v1.0
33
Figure 2.13 Set Virhub configuration
13)After setting the above configurations, click [Save] and reboot the device to
active the configuration. The configuration becomes effective only after the
Ntrip Modem TR600 is restarted.
Note: the mserver software and Verhub software are under development,
stay tuned.
2.2 Configuration Parameters
The configuration menu of David30 GNSS receiver can be viewed on Nuwa
app, the detailed usage of Nuwa app refers to the user manual of Nuwa app
which can be downloaded on Tersus official website
https://www.tersus-gnss.com/document/david30-gnss-receiver
under the User
Manual section.
