User Manual for Tersus GeoBee30 v1.0
11
Figure 1.2 Wi-Fi client setting
c. When using 2G/3G/4G network for data transmission, GeoBee30 will consume no
more than
3GB
mobile data per month. Please contact with your local mobile carrier if
there is any restrictions on wap or data usage.
3) Place the antenna (AX4E02 in the Figure 1.1) in the outdoor open environment. Install
Wi-Fi antenna when Wi-Fi connection is for data communication, and set TR600 as Wi-Fi
client. Install 4G antenna when 2G/3G/4G SIM card is used for data communication.
4) GeoBee30 starts to work in auto start mode by default once it is powered up. According to
the autonomous positioning (without RTK or DGPS), it smoothes out the average value to
be the base coordinate. GeoBee30 outputs the RTCM32 corrections data and sends to the
Ntrip server through LAN, WIFI or 2G/3G/4G mobile network.
5) For the
known
phase center coordinates of the AX4E02 antenna, the two configuration
methods are as follows:
a. Use the COMM1-Bluetooth module in the package, unplug the COMM1 cable and
insert the Bluetooth module to the COMM1 port of David30 GNSS receiver. Launch
Nuwa app on an android device, connect David30 by paring Bluetooth. Create a base
configuration with manual start in radio mode
1
, fill in the base coordinates, antenna
height and Ntrip network information. Detailed operation refers to
User Manual for
