User Manual for Tersus GeoBee30 v1.0
35
The updated firmware is released and available for downloading on Tersus
web site
https://www.tersus-gnss.com/software
, or it can be obtained from
Tersus technical support. After completing the hardware connection mentioned
in 2.1.2 Configure David30, launch the TersusUpdate software on the desktop
or click [Tools] -> [UpdateFirmware] in Tersus GNSS Center software.
In the TersusUpdate interface, the software recognizes the serial port and
scans the baud rate automatically. Select the Port which is connected to
David30 receiver, browse the location for the updated firmware file, and click
[Next] to update the firmware.
Figure 2.15 Update firmware for David30
Contact Tersus Support for firmware file to upgrade Ntrip Modem TR600.
Select ‘Upgrade Firmware’ under ‘System Tools’ in the TR600 configuration
interface, choose the firmware file, and click [Upload/Download] to upload the
firmware.
