Undercounter RFID Refrigerator User Guide, Rev 5 – 06/18/2021
PN 720509
8
This mark indicates the location of the protective earth conductor. Do not disconnect. Disconnection of
the protective earth conductor may impair the protection provided by the device.
•
Risk of shock is present inside the device.
The cover should be removed by qualified engineers or
service personnel only.
Do not use the device outdoors.
Exposure to rainwater may lead to current leakage or electric shock.
•
Be sure to install the device on a sturdy floor.
If the floor is not strong enough or the installation site is
not adequate, injury may result from the device falling or tipping over.
Never install the device in a flammable or volatile location
. This may cause explosion or fire.
Never install the device where acid or corrosive gases are present
as current leakage or electrical
shock may result due to corrosion.
•
Make sure a dedicated power source is reserved and used
exclusively for device.
•
Make sure to remove dust from the power supply plug
before inserting in a power source. A dusty
plug or improper insertion may pose a hazard.
•
Use a power supply outlet with ground (earth)
to prevent electric shock. If the power supply outlet is
not grounded, it will be necessary to have qualified engineers install a ground.
•
When removing the plug from the power supply outlet, grip the power supply plug, not the cord.
Pulling the cord may result in electric shock or fire by short circuit.
Never damage or break the power supply plug or cord. Do not use the supply plug if its cord is
loose.
This may cause fire or electric shock.
Do not touch any electrical parts such as power supply plug or any switches with a wet hand.
This
may cause electric shock.
Never ground the device through a gas pipe, water main, telephone line or lightening rod.
Such
grounding may cause electric shock in the case of an incomplete circuit.
Do not insert metal objects such as a pin or wire into any outlet, vent or gap
for inner air circulation.
This may cause electric shock.
•
If this device will be used for storing poisons, radioactive material or other harmful products,
ensure that it is in a safe area.
Failure to do so may lead to an adverse effect on the health of personnel
in the area and local environment.
Never splash water directly onto the device
as this may cause electric shock or short circuit.
Never disassemble, repair, or modify this device yourself
. Any such work carried out by an
unauthorized person may result in fire or injury due to a malfunction.