Undercounter RFID Refrigerator User Guide, Rev 5 – 06/18/2021
PN 720509
10
Environmental Conditions
This device is designed to be safe at least under the following conditions:
•
Indoor use only
•
Up to 2000 m / 6550 ft altitude
•
+18 °C
to +30 °C, ≤ 80% relative humidity
•
Over Voltage Category II
•
Pollution degree 2 (normal office conditions)
•
Main supply voltage fluctuations up to ± 10% of the nominal voltage
GETTING STARTED
Components
Back Panel (Figure 1)
1. AC circuit breaker
2. Hardware reset
3. Ethernet jack
4. RFID system power switch
Refrigerator Front (Figure 2)
1. USB interface jack
2. Pass reader
3. LCD display
4. Refrigerator controller
5. Alarm mute switch
6. Emergency door release
Figure 1: Back Panel
Figure 2: Front Panel
1
2
3
4
5
6
Unpacking the Device
Inspection
Before unpackaging the device, inspect for any damage that may have occurred during transit. If any damage is
present, please contact Terso Solutions Technical Support at +1 888.376.0257.
Unpacking
•
Remove the straps and remove all packaging. Gently position the device in place on the ground.
•
Remove accessories from inside the device
. Items included are a
power cable and Ethernet cable
.
Other items may also be included such as cables and bins, or other device specific items.
1
2
3
4