
Undercounter RFID Refrigerator User Guide, Rev 5 – 06/18/2021
PN 720509
14
Do not clean the device with scrubbing brushes, acid, thinner, solvents, powdered soap, cleanser, or hot water.
These agents can scratch the paint or cause it to peel. Plastic and rubber parts can be easily damaged by these
materials. Especially never use any volatile solvent to clean the plastic or rubber parts. When a neutral dish
washing detergent is used to clean the device, wipe it up thoroughly with a cloth soaked in clean water and sanitize
with a 70% IPA solution.
Interior Cleaning
If the interior of the device requires cleaning, refer to in house safety procedures to ensure any harmful materials
are handled and cleaned correctly.
Cleaning the Door Gasket
The door gasket should be cleaned monthly. Using a soft cloth, remove any frost build-up from the gasket and
door(s). The door gasket may need to be cleaned more frequently if dirt or excessive frost build-up prevents the
door from closing properly.
Cleaning the Condenser
The condenser should be cleaned once per year at a minimum. Clean the condenser using a vacuum cleaner
exercising care to not damage the condenser fins. Depending upon environmental conditions, the condenser may
need to be cleaned more frequently.
Cleaning Agents and Tips
ITEM
CLEANING AGENT
TIPS AND PRECAUTIONS
Interior and door liners Soap and water
Baking soda and water
Use 2 tablespoons of baking soda in 1 quart of warm
water.
Be sure to wring excess water out of sponge or cloth
before cleaning around controls, light bulb, or any
electrical parts.
Door gaskets
Soap and water
Wipe gaskets and their seating surfaces with a clean,
soft cloth.
Shelves and drawers
Soap and water
Do not wash removable shelves in dishwasher.
Exterior and handles
Soap and water non-abrasive
glass cleaner
Do not use commercial household cleaners,
ammonia, or alcohol to clean handles.
Use a soft cloth to clean smooth handles.
Do not use a dry cloth to clean smooth handles.
TROUBLESHOOTING
If the device appears to not be operating correctly, check to ensure that it is plugged into a wall outlet and powered
on. If further support is needed, contact Terso Technical Support at +1 888.376.0257. Support can also be
http://support.tersosolutions.com