C) Charger
D) Manual
Battery use and care
A battery operated tool with integral batteries or a separate battery pack must
be recharged only with the specified charger for the battery.
A charger that may be suitable for one type of battery may create a risk of fire when
used with another battery.
Use battery operated tool only with specifically designed battery pack.
Use of any other batteries may create a risk of fire.
NEVER place hands or other body parts near the drill bit or chuck during operation.
Hold the drill by its handle only. Because the cordless driver drill operates by battery
power, be aware of the fact that it can begin to operate at any time.
When battery pack is not in use, keep it away from other metal objects like
paper clips, coins, keys, nails, screws, or other small metal objects that can
make a connection from one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
Charging the Battery Pack
(Fig. 2 and 3)
1. Before their first use, the battery (5) must be loaded.
2. Only use the provided charging unit (8) to charge the battery set.
3. Only charge the battery set when the ambient temperature is within 10° - 40° C.
4. Plug the adaptor (8) to a 230V alternating voltage source.
5. The battery (5) should under no circumstances be disassembled.
6. To remove the battery set, press the attachment clip (6) on the top side of the
battery set and extract the battery (5).
7. Connect the plug of the charger to the loading-socket of the battery-set.
8. Red and green LED will light once the battery has been connected to the charger and
the charging procedure will proceed.
9. The battery set is completely loaded and ready for use once the green LED is lit and
the red LED is OFF.
Using your drill
Keyless chuck
The keyless drill chuck (1) allows the clamping of drill bits or other tools without the use
of a drill chuck key.
1. Before inserting a drill bit or other tool, the rotation direction switch (3) must be
switched to its central position.
2. Rotate the front section of the drill chuck (1) to the right to open the jaws until the
tool can be inserted.
3. Insert the drill bit or the tool as far as it will go into the drill chuck.