800mm babyleaf harvester
Instruction manual
800mm babyleaf harvester
Instruction manual
www.terrateck.com
www.terrateck.com
44
45
STORING FOR A SHORT PERIOD
MAINTENANCE OF THE MECHANICAL SYSTEMS
(60) After using the machine, clean the cutterbar with a high-pressure water jet to remove any sap or other organic matter that
can damage the materials and, hence, the effectiveness of the blades.
(61) Lubricate the cutterbar with a fine oil recommended by Terrateck (T.RJP.H1000).
(62) Fit the cutter guard.
(63) Store the machine in an enclosed space that is sheltered from the weather and away from any flammable products, mois
-
ture and dust.
STORING FOR A LONG PERIOD
When you store the harvester for a prolonged period, especially in winter, certain measures must be taken to keep it in good
condition. These measures depend on the location and the season.
(64) Clean the outside of the machine with a high-pressure water jet.
(65) Lubricate the speed reducers regularly.
See (79) and (80).
(66) Lubricate the cutterbar's exchangeable gearbox.
See (84) and (85).
(67) Lubricate the cutterbar with a fine oil recommended by Terrateck (T.RJP.H1000).
(68) Fit the cutter guard.
(69) Tighten all the screws, bolts and nuts.
(70) Store the harvester in an enclosed space that is sheltered from the weather and away from any flammable products,
moisture and dust.
(71) Carry out a full inspection before starting it up.
See "Before you start".
(72) When preparing the harvester for one or more maintenance operations or when fitting or dismantling equipment, place
the machine on a hard, level surface.
(73) Block the wheels with chocks.
(74) The work area must be adequately lit to prevent accidents.
(75) Check that the cutter guard is in place.
(76) Use the right tools to carry out the maintenance on the harvester.
!
IMPORTANT
The use of makeshift tools can lead to injuries, accidents during operation or damage to the working parts of
the machine as well as their poor maintenance.
(77) Do not forget to put the removed safety covers back on because the uncovered hazardous parts can cause serious injuries.
(78) If in any doubt, consult your TERRATECK agent regarding mechanical, electrical or electronic problems.
The speed reducers
The reducers are filled using a pipette.
(79) Unscrew the filling nut and fill it right to the top. The filler
hole acts as an oil level.
(80) Always use the oil recommended by Terrateck (Mineral
gear lubrication oil - T.RJP.HR1000)
Oil for gearboxes
Pick-up reel and conveyor gearbox ca
-
pacity
0.04 litre
Self-propulsion gearbox capacity
0.075 litre
Recommended viscosity
EP320 mineral oil
First oil change
50 hours or 1 year*
Subsequent oil changes
500 hours or 4 years*
Protection index
IP54
*whichever comes first
