VideoSystem Cameo 400 DV
7
Connecting a DV camcorder
On your camcorder there is a port that is marked “DV IN”, “DV IN / OUT” or “iLink™”. Connect
the small jack of the FireWire cable to the port on your camcorder and the larger jack to the
Cameo 400 DV.
Connecting other FireWire™ devices
Besides DV camcorders there are other FireWire™ devices which can be driven with the
Cameo 400 DV. Among these are FireWire™ hard drives, CD ROM or DVD drives, and printers.
Up to 63 of these device can be connected and used simultaniously.
Connecting other FireWire™ devices should be done according to the device's documen-
tation.
Installing the card
Before you insert the Cameo 400 DV in your PC, pay attention to the specifics of your
configuration. Also refer to the manual for your computer and other expansion cards for their
settings.
Please observe the following instructions to ensure trouble-free installation.
If difficulties still arise, carefully reread the relevant chapter in this manual.
First check to ensure that the package is complete.
The delivery includes at least:
1 PCI-IEEE1394 controller Cameo 400 DV
1 installation & driver CD-ROM
1 IEEE1394 connector cable
1 registration card with serial number
1 manual
Send your registration card as soon as possible or register online at
http://www.terratec.net/register.htm
. This is important for support and the
hotline.
Safety Instruction
Before opening the case, unplug the power plug from the wall socket as well as from the PC.
