VideoSystem Cameo 400 DV
23
Transfering DV to your Camcorder.
When you have your first project finished you can send it back to your camcorder. (The DV
Input (DV In) on your camcorder must be enabled.)
1.
Connect the DV cable to the Cameo DV400.
2.
Switch the camcorder on and set it to the Player or VTR mode. Now connect the other end
of the DV cable to the camcorder. Your system automatically recognizes that the camcorder
is now connected to the PC.
3.
Start “Video Editer 6.0” from the program group “Ulead MediaStudio Pro 6.0 VE”.
4.
Load the video project you would like to send to the camcorder.
5.
Click on “File” in the Video Editor menu, and then choose “Select Device Control”.
6.
Pay attention that “MS 1394 Device Control” is selected.
7.
Select “File” again, followed by “Print to Tape” and there choose “Timeline”.
8.
Now you should choose “Entire Project”, then click on “Options”, choose “Device Control”
and confirm your selections with “OK”. The transfer to your camcorder should start
automatically.
If your PC doesn't have an Intel
®
Pentium
®
III 500 processor or higher,
then transfering the data to the camcorder might produce problems
with the audio track. We recommend that you convert your entire
project into one DV video clip in order to transfer it to your camcorder.
After having edited a video clip from the DV camcorder, the audio
track will probably have to be re-processed.
