EN
MUSIC & LIGHTS BABY MONITOR
14
EN
MUSIC & LIGHTS BABY MONITOR
15
The lights (a) enable you to check the battery charge:
•
Battery full:
5 bars light up and gradually decrease
as the batteries lose their charge.
•
Battery low:
the 5 bars flash. 2 beeps will sound
at the same time. The parent unit turns off
automatically after one minute if you do not plug
it into the mains.
•
When the device is charging on the base (m)
, the
5 bars light up one by one repeatedly. They all light
up and stop flashing once the device is charged.
Note: The power level will display on the screen
whether the device is on or off.
• Intercom function: press the (f) button and speak
into the microphone (i) to speak to your baby from
a distance.
Note:
When you press the button (f), you will not be
able to hear your baby.
POWER CHARGING STAND
• This includes a socket at the back for connecting
a mains adapter. Input voltage: 230 V AC; output
voltage: 7.5V DC.
• The green light remains on when the base is plugged
into the mains and turn off when the base is
unplugged.
TECHNICAL CHARACTERISTICS
• Power supply: 3 AAA-type 1.2 V / 600 mAh Ni-MH
batteries or mains via the charging stand.
• Power supply through mains adapter input: 230 V
AC; output: 7.5V DC
• Frequency: 2400 MHz – 2480 MHz.
• The transmission and reception range is 400m with
no obstacles and under ideal conditions.
WARRANTY
This product has a 2-year warranty against defective
material and workmanship. During this period, such
defects shall be repaired free of charge (proof of
purchase should be presented whenever you have a
complaint during the warranty period). This warranty
does not cover damage caused by accidents, misuse
or negligence. In case of complaint, please contact
the shop from which you bought the device before
contacting anyone else.
SETTING THE TIME
• Turn on the parent unit by pressing the on/off button
(b).
• Press down on the screen light button (a) for 4
seconds. The hours will start flashing.
• Press the volume adjuster button (d) to increase
▲
or decrease
▼
the figures.
• Press the screen light button (a) to confirm these
settings. The minutes will then start to flash.
• Press the volume adjuster button (d) to increase
▲
or decrease
▼
the figures.
• Press the screen light button (a) to confirm these
settings. The parent unit is now ready to use.
NB:
You will need to repeat this operation should the
batteries go completely flat
How to use the baby monitor
Transmitter:
• Place the transmitter device (baby unit) on a flat
surface.
• Turn on the baby unit and set the desired sensitivity
level ("LO" for low, "MED" for normal and "HI" for
high) with the button (h).
• Choose the CH1 or CH2 channel with the button (i).
Note:
In order for the transmitter and receiver to
function correctly, you must select the same channel
for both devices.
• Light (d) indicating the battery charge level:
- Normal use:
green light.
- Low battery power:
red light. A beep will also be
emitted on the parent unit. The baby unit turns off
automatically after one minute if you do not plug
it into the mains.
- Device charging:
the light will flash alternately red
and green. It will stop flashing once the device is
charged.
• Select the lullaby of your choice. The icon for the
selected lullaby will be displayed on the parent unit.
Press the lullaby button to stop it at any point. To
switch to a different lullaby, press the button once
more. In this case, the music will not stop or start
gradually but immediately.
Receiver:
Note:
All the baby monitor functions can be adjusted
and controlled from the parent unit. The icon for the
selected function will be displayed on the parent unit.
• Position the receiver device (parent unit) on its stand,
on a flat surface or attach to your belt.
• Press the on/off button (b) to turn it on.
• Choose the CH1 or CH2 channel with the button (l).
Note:
In order for the transmitter and receiver to
function correctly, you must select the same channel
for both devices.
• Select the mode of your choice (A, B or C). Note:
The lights will come on from bottom to top
depending on how active baby is.
• The volume button (d) enables you to adjust the
volume of the speaker.
Notice_Veille_BB son et lumière Terraillon.qxd 26/10/06 9:59 Page 14
