9
7.4.2. SAP/SDP settings table
This table is used to configure the announcement and service description SAP/SDP channel. SAP and SDP are two
protocols for creating an EPG type program guide.
Figure 18. SAP/SDP settings table
"Enable" - check the box if you wish to transmit the program guide.
"Sending period" - introduce the time interval, in seconds, at which the transmitted programmes guide will refresh.
"Username" - the name entered will be transmitted on the SAP/SDP channel.
"IP address" - multicast address of SAP/SDP messages. It is need to be changed only when your IP receiving equipment
use different address.
"Group names" - the names of SAP/SDP groups whose can be assigned to the output streams.
Click on "Update" to save the SAP/SDP channel configuration data.
7.4.3. Output streams table
This table is used to individually configure the output streams.
Figure 19. Output streams table
The description of the table columns.
"Enable" - enable streaming of service.
"IP address" - the multicast address required for the stream to be added. The available range is from 224.0.0.0 to
239.255.255.255, but it is recommended to reduce it from 224.0.1.0 to 238.255.255.255.
"IP port" - the IP port required for the stream to be added. The default value is 1234.
"Service title" - select the service from available input services. In the second line sending of the entire transport stream
can be enabled.
"Output bitrate" - current output bitrate of stream in kbps. When the streaming Ethernet interface is not connected, all
output bitrates will be zero.
To confirm the configuration, click on the "Update" button.
7.4.4. Advanced output settings
For advanced users, the possibility exists of opening an additional table with further configuration options related to the
output services. To open this table, click on the icon
next to the service title.
