11
Figure 21. IP settings screen
The description of the "IP parameters" tables rows.
"MAC Address" - the physical address of the module's ethernet network card is displayed automatically.
"IP Address" - enter the IP address that you wish to assign to the module. This address must fall within the range of local
network addresses.
"Subnet mask" - enter the local network mask.
"Gateway" - enter the IP address of this gateway. This information is only required if you want to access the module from
the Internet.
It is possible to control the module via streaming interface. Check the enable WEB control from streaming interface
checkbox to enable this function.
Note
: for security reasons WEB control from streaming interface schould be disabled.
7.6. CAM settings
This screen consists of three tables: "CA module monitor", "CA module information" and "CA module menu". In the "CA
module monitor" table CAM restart function in case of descrambing error can be enabled. It is recommended to turn off this
option if inactivated conditional access card has been inserted.
The content of the remaining tables depends on the inserted CA module.
Figure 22. CAM settings screen
