13
This enables you to see a list of the log messages of the module. Log contents remains after the power loss of module.
Events in the log e are sorted by time – the newest are in the beginning. Information events are shown in blue background,
error messages are in red. After switching on the unit, the current date is set to 2000:01:01 and time to 00.00.00. When the
MPEG stream is received, the information about date and is decoded too, and the values of these parameter are corrected.
Local time offset in the log is used from the time parameters table (see Figure 21). You can filter required messages setting
corresponding "Logs filtering" checkboxes.
7.8.2. Export parameters
All of the data established on the streamer module can be saved onto a backup file. Inversely, the configuration data
saved on an appropriate file can be restored on streamer module. Move the mouse on the System menu tab then click on the
"Export parameters" line. A window is displayed which allows you to select the action for the data file for the current streamer
configuration. You need to select the "save file to disk" option.
7.8.3. Import parameters
Select this option in "System menu" tab. The Import parameters window is displayed.
Figure 25. Import parameters window
Click on "Click to select file" and select the file containing the configuration data that you wish to restore on the streamer
module. Once you have selected the file, click on the "Upload" button at the bottom of the screen. The upload confirmation
window will be displayed.
7.8.4. Firmware upgrade
If you wish to update the streamer's firmware, select this option in "System menu". The card displayed shows the firmware
version that the streamer has at the present time.
Figure 26. Firmware upgrade window
Click on "Click to select file" and select the firmware update file from the hard drive. When the file name is in the box, click
on "Upload". The new firmware will be installed on the streamer.
