12
In the CA module information table general information about inserted CA module is displayed. When there no CA module
insterted, in the "Status" line is a message: "No module inserted" and remaining lines are empty. Othervise, the "Status"
contains message "Initialised" and remaining lines are filled with information read from the CA module.
As an example, above "CA module menu" table shows the menu for a particular CAM. Click on the corresponding band
to access different options. Click on the "Back" button to return to previous menu, click on the "Home" button to return to
start menu.
7.7. SNMP settings
This menu tab contains the SNMP configuration table.
The description of the "SNMP configuration" table rows.
"Read Community" - community name acts as a password that is shared
by multiple SNMP agents and one or more SNMP managers. The "Read
Community" password is used for read-only access to streamer parameters.
"Write Community" - is the password used for read-write access to streamer
parameters.
"Enable TRAP" - SNMP traps are alerts generated by agents on a managed
device. Check this box to enable TRAP generation. The streamer generates
traps when the diagnostic message occurs.
"TRAP Community" - is the password used for accessing of TRAPS.
"Host IP #1","Host IP #2" - IP addresses of hosts with SNMP managers,
where TRAPS will be send.
Figure 23. SNMP configuration
7.8. System menu
This menu tab contains following submenu items: "Event logs", "Export parameters", "Import parameters", "Firmware
upgrade", "User management", "Restore defaults", "Reset the device", "Language".
7.8.1. Event logs
Move the mouse on the System menu tab then click on the "Event logs" line. The event logs screen will appear.
Figure 24. Event logs table
