16
qualified electrician.
If the heater ceases to function, the most likely cause is that a no-self-resetting
the cut-out operates which could be reset by disconnection of the supply , mains.
If there is still no function please follow the repair advice above.
CLEANING AND STORING
There are no parts inside the machine that require your attention or servicing .
Do not try to open the outer case. By doing so you could damage the motor and
heating element and invalidate the warranty. If you have a problem with the
heater, or if the power cord gets damaged in any way , you must take the unit to
a suitably qualified engineer or electrical repair centre.
Before cleaning the machine, please make sure it is disconnects from the power
supply, and has cooled down completely.
Never clean the machine with water and do not let it get wet under any
circumstance.
The outside case can be cleaned using a slightly damp lint-free cloth [ a small
amount of detergent can be used if required ].
To remove any dust particles etc from inside the front grill, or the rear air intakes,
you can use a regular vacuum cleaner.
Always make sure the machine is completely dry before using.
If you are not going to use the heater for a while it is best to make sure it is
clean and dry and then store it inside a plastic bag in a cool dry place.
With sensible care and attention this heater will give you many years of good
service and economical heating.
