15
HOW TO USE
FUNCTIONS:
“O” OFF
“X” Fan only, no heat.
“I” Low heat
“II” Full heat
THERMOSTAT:
Turn clockwise to increase the heat output.
OSCILLATION CONTROL:
To make the machine oscillate, push the switch button down“ I ” , to turn the
oscillation off, push the switch button down “ O ” .
OPERATION:
Plug the heater into a suitable power outlet [ observing all the instructions
regarding positioning ] and switch on.
To use the fan only function:
Turn the rotary switch to “X”. The fan will blow out air at room temperature.
If the fan does not operate, the ambient room temperature is cooler than the
built-in thermostat ”off” level. Turn the thermostat dial gradually clockwise and
the fan will start blowing.
To use the machine for heating:
Turn the rotary switch to “I” for low heat and “II” for full heat
Set the level of heat by turning the thermostat dial gradually clockwise for the
lowest heat and fully clockwise for maximum.
The thermostat will turn the machine off when the selected room heating is
achieved, and when the temperature drops it will turn on again automatically.
For maximum heat output use “II” with the thermostat turned fully clockwise.
To distribute heat evenly around a room, switch on the oscillation function.
OVERHEATING:
The thermostat will turn the machine off if it overheats.
Overheating can be caused by obstruction to the air intakes on the back of the
machine or the grill on the front. If this occurs please disconnect the machine or
the and allow it to cool for 30 minutes. Remove any obstruction and turn the
machine back on.
If the problem persists you should have the machine checked by a suitable
