ENGLISH
2. At the back of the head, move the appliance from the bottom towards the top.
3. On the top of the head, move the appliance from the front to the back.
For an even cut lift the individual locks of hair with the comb (9) and run the clippers
through with slow, light movements.
When you have finished, return the switch to the “0” (appliance off) position and clean
and lubricate the blades (see relevant paragraph).
Note: Run time for a normal cut with fully charged batteries is approximately 45 minutes;
with use the batteries’ capacity to recharge will diminish, progressively also reducing
run time.
The hairclippers are equipped with a guide comb (2) which can be adjusted for 7 different
hair cut lengths as indicated in the table below:
To increase or reduce the length of the cut press the back of the comb and adjust the
guide-comb by clicking up or down until the arrow is aligned with the required cut number.
Once the desired length has been selected press the switch on the back of the appliance
to lock the guide comb in the chosen position.
Before starting to cut:
• cover the shoulders with a towel to prevent cut hair falling down the back;
• comb through the hair to remove any tangles;
• try out the different cut lengths (starting from the longest) on a small lock ofhair;
• find a comfortable position
After use:
• • recharge the batteries to have the appliance ready for next time.
HOW TO ADJUST THE LENGTH OF THE CUT
Number
Length [mm]
1
3
2
5
3
7
4
10
5
13
6
15
7
17
USEFUL TIPS
Summary of Contents for Tagliacapelli 5000
Page 1: ...Libretto istruzioni Instruction Manual ...
Page 16: ...www termozeta com ...
