24
equal not more than 10,000 ignitions. This should be enough for several years of
failurefree operation.
If it is necessary to replace the ignition device, we should firstly check whether it
is not enough to replace the ignition device fuse. It is located in the burner’s electric
control box. Except for the lack of ignition, broken fuse ceases operation of the radiator
as well as the fuel feeder because those elements are protected by the same fuse.
Instructions for replacing ignition device:
- switch off mains supply by unplugging power cord from the mains socket;
- remove the burner metal housing;
- unplug the ignition device power cords from terminal block located on the burner circuit board;
- unscrew four socket head cap screws which fix the burner components board to its flange;
- pull the components board and remove it with the grate;
- unfasten the feed actuator hook from the grate and place the board aside
Summary of Contents for Ecomat 15
