TERMOTECHNIKA Ecomat 15, Operation And Maintenance Manual

Page: 21 / 33

21
The following steps ensure correct assembly of the burner:
a. mount the burner within the boiler door after making an appropriate assembly hole (see
point no 3.2).
b. mount the electric control box onto selected spot (on the boiler wall, on top of the boiler,
on the boiler room wall etc.) ensuring that it is not exposed to possible damage or
excessive temperature;
c. remove the burner metal housing and connect controlling cord to appropriate socket
located in the burner assembly board;
d. place the fuel hopper next to the boiler and insert feeder into the fuel hopper hole;
e. hang the feeder to the boiler room ceiling ensuring that the feeder pipe is at an angle of
about 35 -
45 degrees (40º recommended);
f. connect the central heating pump and usable warm water pump cords to appropriate
sockets in the adjuster;
g. connect the feeder to its socket located in the electric control box;
h. fill the hopper with fuel;