TERMOTECHNIKA Ecomat 15, Operation And Maintenance Manual

Page: 19 / 33

19
Conditions for installation within the boiler.
The Ecomat burners have been designed in such a way that the flame burning
direction in unobstructed space is at an angle of about 45 degrees. It allowed
custom installation of the burner within boilers which have a narrow and at the same
time a tall combustion chamber (as in the case of upper combustion boilers) as well
as in the boilers with a lengthier and at the same time a low combustion chamber
(as in the case of lower combustion boilers or oil-fired boilers).
Irrespectively of the above, the boiler combustion chamber for Ecomat 15 and
Ecomat 25 should be characterized of the following minimum dimensions: -
minimum depth: 300 mm;
- minimum space over burner combustion pipe: 100 mm (taking into account the above
minimum depth);
- minimum width of the combustion chamber: 250mm;
The boiler combustion chamber for Ecomat 40 should be characterized of the following
minimum dimensions: - minimum depth: 500 mm;
- minimum space over burner combustion pipe: 200 mm (taking into account the above
minimum depth);
- minimum width of the combustion chamber: 400mm;
The boiler combustion chamber for Ecomat 70 should be characterized of the following
minimum dimensions: - minimum depth: 600 mm;
- minimum space over burner combustion pipe: 300 mm (taking into account the above
minimum depth);
- minimum width of the combustion chamber: 500mm;
When the burner is assembled (e.g. within the lower boiler door), the inside
of its combustion chamber should allow ash to fall freely from the burner, favourably
into an ash drawer made of metal. Minimum distance between the bottom of the