29
If it is pressed
button , temperature set can be seen.
If it is pressed
button , temperature that you want to set will be
increase.
If it is pressed button, temperature that tou want to set will be
decrease.
When you pres the tap
button on the display at once , at LCD
display digital values between 00 and 99 appears at LCD display.
With +/- buttons when equivalent numbers water amount passes
from water heater , water heater gives warning with signal tone.
Forexample : Number 03 refers to 30 liter, number 11 refers to 110
liter, number 99 refers to 990 liter. This characteristic provides
convenience to consumer while they are filling jacuzzi and bathroom.
When it is pressed tap button 2 times, with numbers values between
05 and 34 determined inside LCD display, you can see gas consume
of water heater as instant.
Changings values between numbers 05 and 36 shows gas amount as
dm
3
/h or liter /h
When water tap is closed. Water heater will stop automatically and
will be in stanby mode. During water tap is again open, water heater
does not operate. If the water heater will not used for a long time and
if there is no dangerous for freezing, close gas and water valve of
water heater and then swirtch of electric fuse or unplug.
5.1.3 Determination Of Using Gas Amount
5.2.Shutting The Water Heater Off
5.1.2. Setting Using Water Amount As Liter
Ayarlama
