27
Make sure the used gas type is the same with the one stated in the
brand plate.
Follow the following steps for operation of the heater.
1.
Open the water inlet valve.
2.
Switch on electrical fuse of heater or put on plug . Press ON/ OFF
button.
3.
Open the gas valve.
4.
Activate water heater by pressing
ON / OFF button.
(Temperature set value is seen at LCD.)
5.
Set the temperature between 35C and 60C by increasing with
button and decreasing with
button.
6.
Open the water valve.
7.
At LCD display of the heater ,it is respectively seen shower sign
that shows water flow, fan sign that shows water operation and
within few second flame sign that shows water heater start to heat
water. Water heater will be started to operate within few second
and hot water will be ready for using in an instant.
5. USING OF THE WATER HEATER
5.1. The Operation Of The Heater
