Figure.4
Please pay attention to appropriateness of your esidental voltage
and electrical connection conditions to your cooker before connecting
it. Connect your built-in cooker to electrical resource with feeding
cable behind the cooker. Your residence and electrical plug you use
must be earthed and appropriate to CE instructions.
If any installation done except above instrucitons, producer firm
never accepts any responsibility.,
Heat protection class of your appliance is Y.
If you placed your cooker on top of an oven, electrical connections
and cables of oven and cooker must be seperated due to security and
easily disassemble if required.
CAUTION : Feeding cable do not contact with places where
caused increasing temperature on it.
All maintenance and services must be done by authorised
technical service or service firms.
strictive material as seen in Figure 3 to a position of contacting with
kitchen loom.
Thickness must be at least 20 mm for upper part of place where you
install your cooker.
Figure 3
Electrical Connection of Cooker
Before doing all electrical connections of cooker, be sure below
conditions supplied.
-
Electrical capacity of system and socket must be enough for
maximum power that cooker needed.
-
The voltage value in capacity label must be equal with feeding
voltage.
-
Do not use adaptor, reduced or additional cables for connection. This
may cuase overheating.
-
Socket must have an earth terminal.
-
Total power of your cooker is 6000 W.
This product manufactured for working with 230 V AC (monophase) or
400 V 3NAC (triphase).
Electrical connections can be seen at Figure 4. These figure can
be found also at bottom of product. Electrical connection type of
cooker is X. Local instruction rules must be carefully followed.
SEAL
BUILT-IN HOB
BENCH
18
BRACKET
Figure.4
Please pay attention to appropriateness of your esidental voltage
and electrical connection conditions to your cooker before connecting
it. Connect your built-in cooker to electrical resource with feeding
cable behind the cooker. Your residence and electrical plug you use
must be earthed and appropriate to CE instructions.
If any installation done except above instrucitons, producer firm
never accepts any responsibility.,
Heat protection class of your appliance is Y.
If you placed your cooker on top of an oven, electrical connections
and cables of oven and cooker must be seperated due to security and
easily disassemble if required.
CAUTION : Feeding cable do not contact with places where
caused increasing temperature on it.
All maintenance and services must be done by authorised
technical service or service firms.
strictive material as seen in Figure 3 to a position of contacting with
kitchen loom.
Thickness must be at least 20 mm for upper part of place where you
install your cooker.
Figure 3
Electrical Connection of Cooker
Before doing all electrical connections of cooker, be sure below
conditions supplied.
-
Electrical capacity of system and socket must be enough for
maximum power that cooker needed.
-
The voltage value in capacity label must be equal with feeding
voltage.
-
Do not use adaptor, reduced or additional cables for connection. This
may cuase overheating.
-
Socket must have an earth terminal.
-
Total power of your cooker is 6000 W.
This product manufactured for working with 230 V AC (monophase) or
400 V 3NAC (triphase).
Electrical connections can be seen at Figure 4. These figure can
be found also at bottom of product. Electrical connection type of
cooker is X. Local instruction rules must be carefully followed.
SEAL
BUILT-IN HOB
BENCH
18
BRACKET
