- 9 -
INSTALLATION
•
•
•
•
•
•
Water Heater Units must be installed only by Authorized
Technical Service.
The User must never try to install the appliance by
himself.
Incorrect installation may result in water leakages,
electric shock or fire.
The equiment must be installed far from direct sunlight
and from other heat appliances. If this is not possible,
please install a covering.
The Unit must be securely fixed, in order to avoid
noise and vibration.
Make sure there is no obstacle around the Unit.
In places where there is strong wind like seashore,
fix the Unit in a location protected from the Unit.
Carry the Unit to the installation site by observing
the rules and limits set by Manufacturer
•
Install the Unit
In order to avoid scratching or deforming the Unit’s
surface, apply guard boards to the contacting surface.
INSTALLATION
4.
WARNING
•
Avoid contact of fingers or of other objects with the
vanes.
•
Don’t incline the Unit more than 45° in moving, and
keep it vertical when installing.
•
This system is very heavy: it needs to be carried by
2 or more persons, otherwise it might cause injury
and damage.
•
The circulating air for every Unit should be more than
700m
3
/h.
•
Make sure there is enough installation space.
•
Outline dimensional drawings: see Fig. 4-1 and Fig. 4-2.
•
Fig. 4-1
Fig. 4-2
Ø 650
