- 7 -
PRECAUTIONS & ACCESSORIES
CAUTION
•
The earth pole of terminal must be earthed, and the
rated current must be more than 10A. Make sure
that power supply terminal and power supply plug
are dry enough and have a good connection.
Method: Turn on power supply, run the Unit for half
an hour then turn it off and check whether the power
supply plug is hot or not. If it is hot (more than 50°C)
please change it with a new and eligible one, or it may
result in a electric shock or fire.
•
Do not use the Water Heater Unit for other purposes
different from that it has been conceived.
•
In order to avoid injuries, do not remove the fan guard
on the Outdoor Unit.
•
Before cleaning, be sure to stop the operation and
turn the breaker off or pull out the power cord.
Otherwise, an electric shock and injury may be
caused.
•
Please pay attention because water too much hot
(more than 50°C) inside the Water Heater may cause
serious injuries.
•
Do not operate the Water Heater Unit with wet hands.
An electric shock may be caused.
•
The installation height of power supply should be
over 1.8m, to prevent any sprinkling of water from
reaching the Unit.
•
In the water inlet side, the One Way valve must be
installed.
•
It is normal if some water drops from the hole of PT
valve during operation. In case of a great amount of
water, please contact the Authorized Technical Service
for instructions.
After a long term use, check the Unit stand and fittings.
If damaged, the Unit may fall and result in injury.
Arrange the drain hose to ensure smooth drainpipe.
Improper drainpipe may cause wetting of the building,
furniture, etc.
Do not touch the inner parts of the controller.
Do not remove the frontal panel. Some parts inside are
dangerous to touch, and this may cause malfunctions
to the appliance.
Do not turn off the power supply.
System will stop or restart heating automatically. A
continuous power supply for water heating is necessary,
except when repairing and maintenance are carried
out.
ACCESSORIES
2.
1
1
1
1
Accessory name
User & Installation
Manual
Y-shaped filter
Adaptor
One Way valve
Table 2-1
Q.ty Sharp
Purpose
Instructions for installation
& use (this Manual)
To filtrate inlet water
Drain condensate water
Prevent water from
flowing back
