- 20 -
OPERATING INSTRUCTIONS
To cancel TIME ON/OFF set:
Time ON and Time OFF cannot be set to the same
time. If they are the same, the stop time will delay
10 minutes automatically.
For example, Time ON and Time OFF set to
01:00 at the same time, stop time will be to 01:10
automatically.
Time OFF function cannot be used alone.
The key can be used only after set the Time ON.
After selecting the desired settings, press ON/OFF
button and the Water Heater will start according to the
settings.
To stop the appliance, press again ON/OFF button.
The LA error code from the screen of set Temperature
will appear and reminds User when ambient temperature
does not meet the operation conditions of heat pump
Unit (5~43°C).
User can switch the Economy mode to E-heater mode
to reach a higher volume of hot water if needed.
The Unit will return operation pre-status automatically
when the ambient temperature meets the operation
conditions of heat pump mode and the error LA will
disappear at the same time.
•
•
•
Fig. 7-10
Fig. 7-11
Fig. 7-12
In the unlocked state, press the
CANCEL key for 1 second, the TIME
ON/OFF function will be cancelled.
Stop operation for about 10 sec., flashing
stops and TIME ON + TIME OFF set is
finished.
CANCEL
TIME
OFF
TIME
OFF
TIME
ON
Press the TIME ON key again, the minute
digits stop flashing and the hour digits start.
Press the UP and DOWN keys, you can
adjust the hour.
Press the UP and DOWN keys, you can
adjust minutes.
Press the UP and DOWN keys, you can
adjust the hour.
Press the TIME OFF key again, the minute
digits stop flashing and the hour digits start.
Press the TIME OFF key, the minute digits
on the display start flashing slowly.
NOTE
Power ON and Power OFF
•
Operation status
•
ON\OFF
Warning!
In case of a blackout, when power supply
is restored, the Water Heater will automatically
restart with previous settings, but Timer settings will
be cancelled, so it is necessary to set Timer again.
•
