31
Operating Manual Crawler Excavator TC37
Technical Specifications
3
3.6.2
Fuel, lubricant, and coolant specifications
Prescribed fuels, lubricants, and coolants
for Central Europe
Application
Code
designation
according to
Bi
1
Designation
Specification, standards,
Quality
Remarks
Engine
–
Diesel fuel
EN 590
ASTM D975 1-D / 2-D
Attention
Before using RME fuels
(rape oil methyl ester), it is
essential to consult your
responsible Terex dealer
for further details.
Engine
EO 1540 A
Engine oil
SAE 15W-40
API CF4
See also engine manufacturer's
Operating Manual.
Cooling for
Engine
SP-C
Coolant
Antifreeze based on
ethylene glycol
See also engine manufacturer's
Operating Manual.
Hydraulic
system
HYD 1040
Hydraulic oil or
multi-grade
engine oil
HVLP 46
or
SAE 10W-40
The following viscosity limit values
must be observed (according to
ASTM 445):
at 212 °F min. 8 cSt
at 14 °F approx. 1500 cSt
BIO-E-HYD-
HEES
Biodegradable
hydraulic oil on
synthetic ester
base
Filling according to customer
specifications. Brand label on
machine.
The same viscosity specifications
apply as for mineral hydraulic oils.
Machine damage
caused by non-mixable bio
oils.
• Do not mix bio oils from
different
manufacturers.
Attention
When changing from
mineral to biodegradable
hydraulic oils, the tank and
hydraulic system must be
completely drained,
cleaned and flushed.
For further details before
changing oils, please
consult your responsible
Terex dealer.
Transmission(s)
GO 90 LS
Transmission oil
SAE 85W-90LS
API-GL 5
Alternative recommendation:
SAE 80-90LS
Lubricating
points
MPG-A
Multi-purpose,
lithium
-soap based
grease
K2K-30
DIN 51825
Tab. 8
Fuel, lubricant, and coolant specifications
1
In conformity with the regulation lubricants of the Main Association of the German Building Industry e.V.
