Care and Maintenance
7
TC29
79
7.9.18 Electrical equipment
Battery
The battery is located below the right-hand side
flap.
The instructions of the battery
manufacturer must be observed when
using the battery for the first time.
•
The acid level should be approx. 10 mm above
the edges of the plates. If necessary, top up
with pure distilled water.
•
Only check the battery with the engine off.
In the case of maintenance-free
batteries, this check is not necessary.
Removing the battery
•
Open the side flap.
•
Disconnect first the battery ground cable, then
the positive cable.
•
Detach the clamping bracket (70/1).
•
Lift out the battery.
Installing the battery
•
Place the battery in the machine.
•
Secure with the clamping bracket.
•
First connect the positive cable, then the
battery ground cable.
Ensure that the negative terminal is
connected to the negative pole (-) and
the positive terminal to the positive pole
(+).
•
Close the side flap.
In winter, in particular, the battery charge should
be closely monitored.
Lighting and warning equipment
•
Check the function of the lighting equipment.
•
Check the function of the indicator lamps.
•
Check the function of the warning equipment.
1
HR14-03-70
Fig. 70 Battery
Summary of Contents for TC29
