Terex Robot 15000, Operator'S Handbook Manual, Page: 35 / 42

Document 57.0300.0200 - 4
th
Edition 07/2000
- Forlì
Page
31
Robot

C-4.6 USING THE ROBOT FOR JOBS UNDER
THE LEVEL SURFACE
(model 15000)
The robot 15000 is equipped with hydraulic rotation for
jobs under the level surface. In this case, proceed as
follows:
• Move to a large and solid ground and lower the
machine stabilisers.
• Remove the control box used to operate the robot
from the platform, remembering to unplug the power
plug from the socket placed in the lower part of the
control box.
• Using the cable provided, plug the previously re-
moved control box in the power socket placed
closed to the branch box.
• Lower the robot boom to the ground and remove
the four screws
A locking the rotation (fig. C20).
• Plug the control panel B (fig. C21) to the special
socket B in the handler.
• Raise boom and robot at least 5 metres from the
ground to be sure they can move freely.
• Rotate the robot.
• Unplug the control panel and refit the 4 locking
screws.
• Refit the control box in the platform.
A
A
B
SETUP
C
Fig. C19
Fig. C20
Fig. C21