Terex PT100G Forestry, Service Manual

Page: 74 / 142

4.
Remove the battery from the tower compartment
(fig. 12-3).
Installation
1.
To install the battery, reverse the removal
procedure.
Exhaust System
Removal
1.
Perform the radiator/oil cooler removal procedure
on page 8-3 to provide access to the exhaust
system components.
2.
Remove the bolts securing the rear belly pan and
remove it from the machine (fig. 12-4).
3.
Remove the nuts securing the head-pipe to the
turbo, then pull it away from the studs (fig. 12-5).
4.
Remove the tension springs that secure the middle
pipe section to the head (upper) pipe and muffler
inlet (lower) pipe (fig. 12-6).
5.
Remove the upper and middle pipe sections from
the machine (fig. 12-7).
6.
Remove the clamps that secure the inlet and outlet
pipes to the muffler (fig. 12-8).
12-6
Spring
12-2
Compact Track Loader
12. Engine
12-4
12-5
12-3
Required Tools
Pry Bar(s)
Combination/Socket Wrench
Rubber mallet
Penetrating Lubricant
12-7
The exhaust system is very hot at
operating temperature. Make sure the
machine is off and cool before attempting
to service the exhaust system.